Do you love spending your time listening to music in your car and enjoy playing the music rhythms and relaxing listening to music but it can be tough when your listening to music in the car and the infiltrating noise will appear from different angles like wind noise, tires noise or the car door noise on the caused by the factors like wind, music or the road.
Most of us wish our cars are quitter while we drive and have a long drive on the weekends. If you have heard about the sound deadening material and adding soft material like mats to absorb or block noise.
By using the sound deadening material you can simultaneously reduce or block the unwanted noise you hear from the road or the music and by adding thermal insulation you can make your car quiet.
In this guide, I will walk you through how you can apply sound deadening material to your car door and make it much quieter and peaceful.
Tools And Material Required
Before explaining the procedure let’s dive into tools that are required to sound deadening material for the doors and the material which you need to place on the doors to simultaneously make it quieter.
Let’s dive into the tools and materials
- Screwdriver or a drill
- Rubbing alcohol and a clean cloth
- Knitwork gloves
- Knife or a sharp pair of scissors
- Roller or the rounded object
That’s all now your good to go you need to purchase the sound deadening material online and get your things ready. Start your sound deadening car doors project. also, make sure to wear clothes you don’t care about while soundproofing car.
Procedure For Sound Deadening Car Doors
1. Searching For The Screws
If you have done research about your car model then you might have been cleared about what you need to do when you open your car door and the screws of your car will be exposed. once the screws are exposed then you need a screwdriver or a flat screwdriver to take off the screws.
The doors of the car meant to be taken off easily you don’t need to worry about removing the door it’s not rocket science so, let’s make it clear and simple.
2. Removing The Screws
Once you find the screws on the panel then you’ll find the actual screws. Apart from the actual screw, there will be screws which are the side of the door when the door closed.
Here the screwdriver or the drill will be used once you take off the screws than you need to take a note or the video of where the screw came from so that it will be easy while putting them back.
You can use a magnetic drill attachment which will help in putting the screws in one place and prevent them from getting lost or flying off.
3. Taking Off The Panel
Once you have taken off the screws then your panel is ready to take off you need to press from the bottom to take it off and disconnect if it has any speaker attached to it.
You can disconnect the wire of the speaker and remove then your panel will easily come out once you press from the bottom and lift it to top. Again taking the picture or note will be helpful in putting it back.
Now highlighting the point over here that if you find this point not working for your car it’s better to do research about your car model beforehand.
4. Taking Off The Extra Protection Under Door Panel
There are some cars that have an extra protection layer for the soundproofing of the car in the older cars there were plastic wraps covered under the door panel but in new cars its cover with fabric material for soundproof.
Take off that carefully you can take a picture its pasted with glue so you can remove it with the help of scissors remove it smoothly so while putting back you don’t face any difficulty.
However, putting it back might require you to reheat the adhesive or use some new glue on the layer. The layer will come out easily smoothly take out from the edges.
5. Prepare The Material
Before jumping into the application you need to clean the doors thoroughly and wash them with some rubbing alcohol. Sunlight will not pass inside the door so you have to wash the door.
You need to clean all the parts of the door thoroughly to put the sound deadening material on. So make sure to clean the door from the wholes. If you find a flatter surface then clean it more carefully because that will be the place where you will be putting sound deadening material.
After cleaning all the surfaces of the door then you need to have a knife and gloves most sound deadening materials come with a protective layer. Wearing gloves will protect your fingers from sticking and clothes.
Much sound deadening materials are thick and they are easy when it comes to insulation the thicker material will be hard to cut you need a sharp tool to cut the material. You can use scissors which are sharp and can cut the thick material. make sure to cut the material on the surface you can damage.
6. Apply The Sound Deadening Material
Now comes the task of sound deadening the car door apply the material on the surfaces and thoroughly on the holes of the door. You can cover the surface by cutting in rectangular shapes.
Take the protective layer and stick the material with the glue make sure there shouldn’t be any air bubbles in the material by sliding your gloves from the edges to the center of the door and moving on the bottom.
After checking upon the air bubbles you need to use a roller to make sure the material sticks well and there are no gaps in the material while it’s sticking it’s not necessarily important to use a roller you can use a handle of the screwdriver and still get your job done.
After placing the material knock on the metal of the door to see how loud it is and check upon interval and see how much more material you need to place and put the material according to that.
After putting the material don’t cover the entire metal part give some space for the speaker and the wires to pass easily once you put sound deadening material car doors.
7. Put Back Everything In Place
Now you have applied all the sound deadening material you need to place everything back on the place the screws which you have taken back. If you have taken out the speakers then you need to connect the wires and placed the speakers back in their place.
However, put the door panel back and put the screws back from which you have taken out it will be easier if you have taken the pictures of the panel and the screws.
That’s all you need to repeat the procedure for all the doors of your car and it will be soundproof finally by following all the doors of the car.
Final Thought
It’s a wrap for the sound deadening car doors now let me come to a point that you can soundproof one door at one day and other on another day it will not exhausting for you and the sound deadening of the car door will be done without hassle.
You can also apply sound deadening material to the car floor and the roof of the car with similar steps used for sound deadening car doors.
However, you can do it steadily and slowly to meet all the required steps for sound deadening car doors don’t be rush the process will end up with material not sticking properly.
If you liked the article let us know also, share how this guide helped in sound deadening car doors we would love to hear from you .Checkout, our blog on acoustic spray foam insulation
FAQ
Q1. Is sound deadening car doors worth it?
Ans. Yes, Sound-deadening doors is worth it. Sound deadening car doors will cost you from $100-$500 depending on the material you use to soundproof the car and you need to take off the doors and place the material for better sound deadening of the car doors .perhaps it will depend on the application but it will add comfort and quietness in this cost.
Q2. How much does a soundproof door cost?
Ans. The soundproof doors will cost you around $1200-$4000 it also depends on the size of the door and the car model. Of course quality is also a matter and makes sure to check STC and NRC ratings before purchasing your car door.
Q3. Where should I put sound deadening in my car?
Ans. You can put sound deadening on various parts of the car
- Doors
- Floor
- Roof
- Wheel arches
- Trunk and trunk lid
- Hood etc.