As an amazon associate, I may earn some commission on the products purchased through links but it will not cost you extra.

Noisy windshield wipers will disturb a person who is driving and drives the person insane which will lead to something unexpected. If your wiper blades are making squeaking noise then you may probably face squeaking noise the next time it rains.

While driving you cannot hear what the person next to you is saying and the squeaking noise will take over the fun of the ride. Sometimes when your return home after a long tiring day and the squeaking noise of the wiper blade will annoy you.

No one wants to hear the sound of the squeaking wiper blades when they are experiencing problems. You don’t have to put up with the squeaking sound of the wipers. You can stop the noise of the wiper blades as long as you take some of the common steps.

These steps will help you to stop the annoying noise of the wiper blades and you can drive safely during the rainy season also. I will be sharing some of the steps which help you to stop the squeaking noise of wipers.

7 Ways To Stop The Squeaking Noise Of Windshield Wipers

Here are some of the steps which will help you to stop the squeaking noise of the wiper blades. Let’s dive into the guide on eliminating the squeaking noise of wipers.

1. Clean Your Wiper Blades And Windshield

One of the most common causes of the squeaking noise of windshields is dirt. If you can do a thorough cleaning of the windshield and wiper blades then you can eliminate the squealing noise of the windshield.

You have to lift the wiper blades to clean them and clean get some soapy water to wipe them down to get any residue or junk off the wipers.  It is important to clean the arm and hinges because when the hinges of the wiper blade get caked with dirt or other types of junk.

When the hinges get the dirt then it will contribute to the squeaking noise. A little bit of cleaning is important to get rid of this problem so make sure you take the time to do it. You will be able to remove a lot of dirt from the blades and then focus on cleaning the windshield.

The windshield should be clean using some glass cleaner. Spray the windshield down with glass cleaner and then start wiping it down. Using a microfiber towel for cleaning will be the best choice and if you don’t have a microfiber towel then you can use a tint-free cloth that can do the job.

Also, keep some of the alcohol wipes in your car because there will be times when your wiper blades will start making a squeaking noise and you can clean it anywhere with the alcohol wipes.

2. Soften The Rubber On The Wiper

The rubber on your windshield wiper will get hard. This can happen due to direct exposure to sunlight and also there are many reasons for this. fixing this issue is not difficult. You can soften the rubber with the help of some rubbing alcohol.

Applying rubbing alcohol to the rubber part of the blades will soften it up. Use a paper towel and wipe the rubbing alcohol up and down to the length of the wiper blades. This will make the runner soften so that you can use the wiper blades again without dealing with the squeaking noise.

3. Adjust Your Wiper Blades

Adjusting the position of wiper blades is important to stop the squeaking noise. sometimes the blades are stiff and they will not be getting the right moves in order to work properly. This can be fixed by simply adjusting the position of the blades. You have to twist the arm to get the best results.

If you have a wiper blades are digging into the windshield. Then you need to make some adjustments. Also, the wiper blades should not remain vertical while they are wiping the windshield. Make sure the things are positioned correctly then you will eliminate the squeaking noise.

It should be eliminated if the noise is with the positioning of the wiper blades. So you need to take the time to observe if things are working after the positioning of the wiper blades.

4. Tighten The Fastener

Tightening the fastener will be worth it. When the fastener is too loose then it can lead to the squeaking noise of wiper blades. Vice versa this can also happen when things are too tight. You need to tighten the things in a manner that the wiper blades work fine.

If you face difficulty in how tight these fasteners should be then take out time and experiment. Observe what is working and what is not working. Spray some fluid and turn the blades on to listen for any squeaking noise of the wiper blades. Once you tighten the fastener then it will stop the squeaking noise of wiper blades if the culprits are fasteners.

5. Replace The Existing Wiper Blades

If the wiper blades are torn out then it’s simply time to change the wiper existing wiper blades with the new ones. Wiper blades are meant to be changed every six months or year.

If it has been more than one year since you changed the wiper blades then it’s time to change the wiper blades. You should get a quiet wiper blade and install them as soon as possible because the squeaking noise is due to the torn-out wiper blades.

If you have not changed the wiper blades between six months or one year then you might keep using it. Consider the rubber softening method and clean them thoroughly. If you’re not getting better results then you can change the wiper blades with the quieter ones.

The cost of replacing the wiper blades is more petite that’s the reason I would recommend you to get the new one for more enhanced results.

6. The Problem Might Be Due to Your Windshield

The problem might be due to your windshield. This is not the most common cause of the squeaking noise of wiper blades but it’s one of the causes which should be mentioned.

The Windshield surface has a rough surface due to years of being exposed to dirt and harsh weather conditions. You need to clean the windshield thoroughly and if cleaning the windshield doesn’t fix the issue then you need to replace the windshield.

Therefore this is not the most common cause of the squeaking noise of windshield wiper if none of the other methods listed in this guide doesn’t work then you should check with the windshield. Replacing the windshield is the most costlier option hence first you need to check with all the methods.

7. Check The Windshield Wiper Fluid

Checking with the windshield wiper fluid is enough to fix the problem of the squeaking noise of the wiper blades. But when the fluid is too low then the windshield may not be sufficiently wet when you’re using the wipers.

This will cause the squeaking noise of the wiper blades which will annoy you. It’s always a good idea to check with the wiper blade fluid to make sure you have enough.

Make the habit the checking the wiper fluid once a month so that you never run wind up running low. Try to top up the fluid as often as you can. Make sure that you’re using the right fluid to get better results.

Final Thoughts On Squeaking Noise Of Wiper Blades

Fixing the squeaking noise of the wiper blade is not too hard. Many people will fix the issue by simply cleaning up the wiper blades. This can also be beneficial to make changes to your wiper blades and windshield itself.

One of these methods will definitely help you and if not then you need to figure out by trying the methods and find which is causing the squeaking noise of wiper blades.

You don’t need to deal with the squeaking wiper blades if you don’t want to all the fixes given here is enough to stop the squeaking noise of the wiper blades. All you need to do is just take some time and figure out the cause and implement the methods.

Now you don’t need to deal with the squeaking noise of wiper blades which is annoying and taking over the fun of your drive and puts you in danger while driving.

If you liked this let us know we would love to hear this. and if you have any questions for us drop them in the comment box below. Also. Check out our blog on how to reduce wind noise in a car.

FAQ